Version
Date
|
Changes
|
2.00 build 17
2007-1-27
|
Added support for Märklin mobile crane 46715
|
2.00 build 2
2005-9-29
Reinstall
Note new exe name.
|
Numerous new capabilities are now available:
Executable now called bwlite.exe
Crane control and configuration
Configuration settings can be saved
Ability to define Locomotives
Ability to calibrate locomotive speed steps
Ability to define trains
Ability to display Intellibox decoder address settings
Ability to control trains from a remote train controller (separate program)
Ballistic control of locomotive speeds. (Very useful when they have a large number of speed steps)
Intellibox Power and train halt mode indicators and toggles.
|
1.01 build 1
2004-4-19
Reinstall
|
Added audio feedback to the k83/4 test screen. The program will now call out "red" or "green" when the output is changed.
Added Red and Green buttons to the k83 test screen.
Improved display of Non-PC event logs for loco changes. The functions are now decoded and the direction is also displayed.
Bug fix: Non-PC event changes now display the correct address for addresses above 256
|
1.00 build 137
2004-4-17
|
Added the ability to log all known and Friendly CV values so that they can be saved for reference.
Renamed some of the buttons in the Programmer window.
Added and improved the hover text for many of the controls in the Programmer window.
Added the ability to customize the s88 indicator LEDs.
Bug fix: Clear the Programming track command queue if the connection with the Intellibox gets lost of out of synch.
|
1.00 build 133
2004-4-11
|
Expanded turnout range testable and reported to 320.
Bug fix: Fixed turnout testing module disabled by bad fix in 132.
|
1.00 build 132
2004-4-11
|
Bug fix: Fixed run time error if a turnout was changed manually on the IB.
|
1.00 build 131
2004-4-10
|
Simplified the interface. No need to set number of s88 or k83 modules anymore.
Log Window now positions itself next to main window
Changing port will power IB off if it was connected before.
Bug fix: Fixed a problem connecting when SO26=0 and IB baud rate 4800 or 9600
Bug fix: The Always on top option in the log File menu now work on Windows XP too.
|
1.00 build 129
2004-4-10
|
Added ability to save log files.
Special Options are now logged without a time stamp so that saved copies of the SO list can be compared without time stamps getting in the way.
Bug fix: Fixed a problem with fast computers when switching baud rate.
Known bug: The Always on top option in the log File menu does not work on Windows XP
|
1.00 build 127
2004-4-5
|
Implemented RS232 Break command to allow for automatic baud rate detection
Added ability to dump all 1000 Special Options to the Log window
Stop s88 polling if s88 Test screen closed with X button instead of Quit button
|
1.00 build 122
2004-3-28
|
Added ability to view a resizable log window.
If number of modules are changed, corresponding test windows are now closed so that new limits can be picked up.
Added hover help to controls.
Limited k83/4 modules to 63 to avoid an overflow issue on last module.
Power Intellibox off on exit.
|
1.00 build 121
2004-3-28
|
Fixed crash if s88 monitor was set to monitor s88 above module 5. Thanks to Wim Ros for reporting such a nasty bug!
|
1.00 build 118
2004-3-28
|
Improved UI for getting baud and ports correct, added Retry button when Intellibox cannot be found.
Display version number.
|
1.00 build 116
2004-3-25
|
Initial release
|